1B-24 AIR CONDITIONING (OPTIONAL)
LIP TYPE SEAL (SEIKO SEIKI COMPRESSOR)
REMOVAL
1) Remove magnet clutch, referring to "MAGNET CLUTCH" in this
section.
2) Remove front head mounting screw (10 pcs).
1. Front head
3) Remove front head by pushing cylinder shaft.
NOTE:
Be careful not to remove cylinder from case.
4) Remove O-ring.
1. Front head
2. Cylinder shaft
3. Cylinder
4. Case
5. O-ring
5) Remove lip seal from front head.
1. Front head
2. Bearing puller
INSTALLATION
1) Press-fit lip seal into front head using special tool (E).
Special Tool
(E): 09991-06050
1. Lip type seal
2. Front head
CAUTION:
Do not reuse mechanical seal once removed from
compressor.