Canon Staple Finisher-D1 Service Manual page 93

4
Parts Replacement and Cleaning Procedure > Main Units > Pull out the Saddle Unit (Service Position)
CAUTION:
Draw it out slowly. If it is drown out too much, the
•
saddle cable and the cable guide may be damaged.
When the saddle unit is return into the finisher from
•
the service position, lift up the center of the cable
guide. If it is carelessly pushed into the finisher, the
center of the cable guide will fall down so that the
saddle cable and the cable guide may be damaged.
4 Parts Replacement and Cleaning Procedure > Main Units > Pull out the Saddle Unit (Service Position)
F-4-69 F-4-69
4-33
4-33