Removing The Stacking Tray Paper Retainer Motor (M114); Removing The Tray Auxiliary Guide Motor (M120) - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Motors > Removing the Tray Auxiliary Guide Motor (M120)

Removing the Stacking Tray Paper Retainer Motor (M114)

1) Remove the processing 2) Disconnect the motor connector and release the harness from
tray unit. the edge saddles.
(Refer to page 4-30)

Removing the Tray Auxiliary Guide Motor (M120)

2) Remove the 3 screws.
1) Remove the processing
tray unit.
(Refer to page 4-30)
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Tray Auxiliary Guide Motor (M120)
3) Remove the 2 screws and then remove the stacking tray
paper retainer Motor
F-4-134
3) Release the harness from the 4 wire saddles, disconnect
the motor connector and remove the motor mount.
F-4-136
F-4-135
4) Remove the clip, 2 gears, 2 screws and
then the tray auxiliary guide motor.
F-4-137
F-4-138
4-59
4-59