Canon Staple Finisher-D1 Service Manual page 133

4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Alignment Roller
7) Release the harness from the wire saddle. Remove the 5 screws and
remove the transport cover.
x5
x3
9) Remove the clips and then remove the alignment
rollers.
F-4-180
4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Alignment Roller
8) Remove the screw and connector, and then take out the alignment roller
unit.
x1
x1
F-4-178
F-4-179
4-73
4-73