4
Parts Replacement and Cleaning Procedure > Motors > Removing the Paper Return Guide Roller Motor (M121)
Motors
Removing the Paper Return Guide Roller Motor (M121)
2) Remove the clip, the flange, the pulley, the straight pin and the
1) Remove the left inner
cover.
belt.
(Refer to page 4-20)
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Paper Return Guide Roller Motor (M121)
3) Disconnect the connector and remove the 2 screws, and then
remove the paper return guide roller motor.
x2
x2
F-4-130
F-4-131
4-57
4-57