Remove The Paper Holding Rollers (Front) And (Left) - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Remove the Paper Holding Rollers (Front) and (Left)
CAUTION:
After installing the 2 torque limiters
(tray1/2 paper holder), turn the drive
shaft to the allow direction to put away
the tray paper holder lever in the
processing tray unit.

Remove the Paper Holding Rollers (Front) and (Left)

1) Remove the processing 2) Take out the clip.
tray unit.
(Refer to page 4-30)
4 Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Remove the Paper Holding Rollers (Front) and (Left)
F-4-121
4-51
4-51