4
Parts Replacement and Cleaning Procedure > Motors > Removing the Gripper Base Motor (M116)
Removing the Gripper Motor (M117)
2) Disconnect the 2 connectors and remove the 2 screws to remove the
1) Remove the processing
tray unit.
gripper motor.
(Refer to page 4-30)
Removing the Gripper Base Motor (M116)
2) Disconnect the 2 connectors and remove the 2 screws to
1) Remove the processing
tray unit.
remove the gripper base motor.
(Refer to page 4-30)
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Gripper Base Motor (M116)
F-4-132
F-4-133
4-58
4-58