Basic Sequence Of Operations - Canon Staple Finisher-D1 Service Manual

2
Technology > Saddle Stitcher Unit > Basic Sequence of Operations
Saddle stitcher controller PCB
[1] [2]
S227 S226
Saddle Delivery Sensor 1,2 signal
[1]
[2] Saddle Vertical Path Sensor signal
[3] Saddle Inlet Sensor signal
S201 Saddle inlet sensor
S203 Saddle vertical path sensor
S226 Saddle Delivery Sensor 1
S227 Saddle Delivery Sensor 2
2 Technology > Saddle Stitcher Unit > Basic Sequence of Operations
[3]
S201
S203
F-2-36 F-2-36
T-2-8 T-2-8

Basic Sequence of Operations

The saddle stitcher block uses the following sequence of operations:
1. Transport
Moves the paper from the transport block to the vertical path assembly.
2. Alignment
Aligns the edges of sheets of paper coming to the transport block.
3. Stitching
Uses the stitcher to staple the middle of the stack.
4. Folding/Delivery
Folds the sheet in half, and sends the result to the saddle delivery tray.
The particulars of the individual operations are as follows:
b
Folding/Delivery
Stitching
2-23
Transport
Alignment
F-2-37 F-2-37
2-23