Removing The Static Eliminator (Grate-Shaped Lower Guide Unit); Removing The Paper Holding Rubber - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Paper Holding Rubber

Removing the Static Eliminator (Grate-shaped lower guide unit)

1) Lift the tray 1 unit until it will stop. Remove the screw and take out the static eliminator.

Removing the Paper Holding Rubber

1) Lift the tray 1 unit until it will stop. Remove the paper holding rubber after drawing out the paper holding
lever.
4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Paper Holding Rubber
F-4-113
F-4-114
4-48
4-48