Unpacking And Checking The Contents; Checking The Contents - Canon Staple Finisher-D1 Service Manual

Unpacking and Checking the Contents

Checking the Contents

Open the container box and check that none of the included parts is missing.
[5]
[1]
[4]
[9]
[15]
6
Installation > Unpacking and Checking the Contents > Checking the Contents
[6]
[2]
[3]
[19]
[7]
[16]
[17]
[10]
[8] [18] [20]
6 Installation > Unpacking and Checking the Contents > Checking the Contents
[1] Finisher .....................................................1 pc.
[2] Latch catch................................................2 pcs.
[3] Positioning pin...........................................1 pc.
[4] Shunt cable unit ........................................1 pc.
[5] Wire saddle ...............................................1 pc.
[6] Spacer .......................................................1 pc.
[7] Stapler unit staple case.............................1 pc.
[8] Staple cartridge .........................................3 pcs.
[9] Screw (RS-tight, M4 x 8) ...........................9 pcs.
[10] Tray label ..................................................1 pc.
[11] Setting label ..............................................1 pc.
[12]*1 Latch cover ...............................................1 pc.
[13]*1 Screw (Bind, M4 x 6) .................................2 pcs.
[14]*2 Ground plate .............................................2 pcs.
[15]*2 Booklet tray ...............................................1 pc.
[16]*2 Saddle stitcher unit auxiliary caster ..........1 pc.
[17]*2 Screw (with spring washer) .......................2 pcs.
[18]*2 Staple cartridge for saddle stitcher ...........2 pcs.
[19]*2 Saddle caution label
[20]*3 Power cord
*1: Staple Finisher-D1 only
*2: Booklet Finisher-D1 only
*3: The package may contain several power cords intended for use in
[11]
Europe. Use the correct power cord to match the location/area of
installation. Make sure not to leave unused power cords at the site.
F-6-9 F-6-9
6-8
6-8