Selecting The Site Of Installation - Canon Staple Finisher-D1 Service Manual

Selecting the Site of Installation

Select the site of installation, making sure that there will be enough space for work (e.g., removal of paper). Be sure that there will be no gap between the finisher and the upstream connection
machine.
The machine must be away from the wall by 100mm(*) or more to secure an enough space to perform machine operation.
*: Make sure to provide at least 800mm of space if you install one or more of the following: Paper Folding Unit-H1, Professional Puncher-C1, or Document Insertion Unit-K1.
<Staple Finisher-D1>
100mm or more
\
1,000mm or more
6
Installation > Checking Before Installation > Selecting the Site of Installation
<Booklet Finisher-D1>
1,000mm or more
F-6-4 F-6-4
6
Installation > Checking Before Installation > Selecting the Site of Installation
100mm or more
F-6-5 F-6-5
6-4
6-4