Make sure that all pieces of packing tape, cushioning materials and fixings have been removed. Operating the finisher without removing them can cause machine troubles.

Connect the power cord of the finisher, and then connect the power plug to the outlet.

Caution:

The package may contain several power cords intended for use in Europe. Use the correct power cord to match the location/area of installation. Make sure not to leave

unused power cords at the site.

Connect the power plugs of the option and host machine to the outlets.

Turn the power switches on in order of the host machine from the options.

Check the operation such as paper feed and stapling to make sure that problems such as a jam or malfunction do not occur. If a jam or malfunction occurs, adjust the height and tilt with

reference to Section "Making Adjustments".

Installation > Operation Check

6-37

Table of Contents