Canon Staple Finisher-D1 Service Manual page 182

18) Put the interface cable in the harness guide so that it does not touch the PCB and cover.
20) Secure the interface cable connected in step 10) using the wire saddle.
(The illustration shows the case where bundle the interface cable forming the 2 loops.)
x1
6
Installation > Installation Procedure > Connecting to the Upstream Connection Machine
F-6-76 F-6-76
6 Installation > Installation Procedure > Connecting to the Upstream Connection Machine
19) Lace the interface cable in the groove, and then attach the PCB cover.
x1
F-6-74 F-6-74
Caution:
•
Do not bundle the interface cable to
form three or more loops.
•
The interface cable connected
to the option secures to the wire
saddle of the option.
6-29
F-6-75 F-6-75
6-29