Connecting To Document Insertion Unit; Connecting To Professional Puncher - Canon Staple Finisher-D1 Service Manual

■

Connecting to Document Insertion Unit

1) Using four screws, attach two latch catches (front and rear) on the left side of the
document insertion unit.
x4
■

Connecting to Professional Puncher

1) Using four screws, attach two latch catches (front and rear) on the left side of the
professional puncher.
x4
6
Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Staple Finisher-D1 only] > Connecting to Professional Puncher
F-6-39 F-6-39
F-6-41 F-6-41
6 Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Staple Finisher-D1 only] > Connecting to Professional Puncher
2) Attach the positioning pin using two screws.
MEMO:
•
The latch catch has three
screw holes. Use two screw
holes according to the
mounting position on the
document insertion unit.
The two latch catches are
•
identical to each other.
2) Attach the positioning pin using two screws.
MEMO:
•
The latch catch has three
screw holes. Use two screw
holes according to the
mounting position on the
professional puncher.
The two latch catches are
•
identical to each other.
x2
x2
6-18
F-6-40 F-6-40
F-6-42 F-6-42
6-18