Unpacking Procedure - Canon Staple Finisher-D1 Service Manual

6

Unpacking Procedure

MEMO:
The finisher is packed using tapes, fixings and cushioning materials to be
protected against vibration and shock during transportation. Be sure to
remove them before starting to install the finisher. It is a good idea to store
away the removed fixings and cushioning materials for possible relocation
of the finisher, e.g., to a new site or for repairs.
Caution:
Staple Finisher-D1 weighs about 61 kg and Booklet Finisher-D1 weighs
•
about 108 kg.
When unpacking the finisher, you can deform or damage it depending on
•
the parts you hold. Do not hold the front cover or upper output tray unit or
lower output tray unit.
6
Installation > Unpacking and Checking the Contents > Unpacking Procedure
F-6-10 F-6-10
Installation > Unpacking and Checking the Contents > Unpacking Procedure
Caution:
When removing the cushioning materials in steps 2) and 3) or moving the finisher from the
pallet down to the floor along the slope boards in step 6), hold the top [A] of the finisher.
[A]
6-9
[A]
F-6-11 F-6-11
6-9