Canon Staple Finisher-D1 Service Manual page 174

■ Connecting to Document Insertion Unit
1) Using four screws, attach two ground plates and two latch catches (front and rear) on the
left side of the document insertion unit together.
x4
■
Connecting to Professional Puncher
1) Using four screws, attach two ground plates and two latch catches (front and rear) on the
left side of the professional puncher together.
x4
6
Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Booklet Finisher-D1 only] > Connecting to Professional Puncher
F-6-48 F-6-48
F-6-50 F-6-50
6 Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Booklet Finisher-D1 only] > Connecting to Professional Puncher
2) Attach the positioning pin using two screws.
MEMO:
•
The ground plate and latch
catch have three screw
holes each. Use two screw
holes according to the
mounting position on the
document insertion unit.
•
A pair of the ground plates
and the latch catches are
identical to each other.
2) Attach the positioning pin using two screws.
MEMO:
•
The ground plate and latch
catch have three screw
holes each. Use two screw
holes according to the
mounting position on the
professional puncher.
•
A pair of the ground plates
and the latch catches are
identical to each other.
x2
x2
6-21
F-6-49 F-6-49
F-6-51 F-6-51
6-21