Canon Staple Finisher-D1 Service Manual page 122

4
Parts Replacement and Cleaning Procedure > Motors > Removing the Front Alignment Motor (M108)
3) Remove the screw and turn the paper holder lever mount towards you.
4) Open the edge saddles, remove the 2 screws and then take out the
motor mount.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Front Alignment Motor (M108)
5) Disconnect the connector, remove the 2 screws and then the front
alignment motor.
F-4-145
F-4-144
F-4-146
4-62
4-62