4
Parts Replacement and Cleaning Procedure > Motors > Removing the Paper Trailing Edge Pushing Guide Motor (M113)
Removing the Buffer Feed Motor (M102)
1) Remove the rear cover
2) Remove the motor connector and the tension spring. Remove
the 2 screws and then remove the buffer feed motor.
(upper).
(Refer to page 4-19)
Removing the Paper Trailing Edge Pushing Guide Motor (M113)
2) Disconnect the connector, remove the 2 screws and then
1) Remove the rear cover
(upper).
remove the paper trailing edge pushing guide motor.
(Refer to page 4-19)
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Paper Trailing Edge Pushing Guide Motor (M113)
F-4-161
F-4-162
4-67
4-67