Canon Staple Finisher-D1 Service Manual page 132

4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Alignment Roller
4) Remove the screw and take out the support plate. Slide the pulley and remove the belt.
x1
5) Remove the 2 screws and remove the transport unit.
4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Alignment Roller
6) Remove the 3 screws and remove the static eliminator unit.
x3
x2
F-4-176
F-4-175
F-4-177
4-72
4-72