Canon Staple Finisher-D1 Service Manual page 95

4
Parts Replacement and Cleaning Procedure > Main Units > Removing the Saddle Unit
3) Remove the screw and disconnect the 3 connectors, and then remove the cable guide.
x1
x2
4) Move the saddle unit to the position where the screw can be seen from the hole, and remove the screws.
x2
4 Parts Replacement and Cleaning Procedure > Main Units > Removing the Saddle Unit
F-4-72 F-4-72
F-4-73 F-4-73
4-35
4-35