Canon Staple Finisher-D1 Service Manual page 175

■ Connecting to Paper Folding Unit
1) Using four screws, attach two ground plates and two latch catches (front and rear) on the
left side of the paper folding unit together.
x4
6
Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Booklet Finisher-D1 only] > Connecting to Paper Folding Unit
F-6-52 F-6-52
6 Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Booklet Finisher-D1 only] > Connecting to Paper Folding Unit
2) Attach the positioning pin using two screws.
MEMO:
•
The ground plate and latch
catch have three screw
holes each. Use two screw
holes according to the
mounting position on the
paper folding unit.
•
A pair of the ground plates
and the latch catches are
identical to each other.
x2
6-22
F-6-53 F-6-53
6-22