Canon Staple Finisher-D1 Service Manual page 176

Connecting to the Upstream Connection Machine
Caution:
Make sure that the host
machine is turned off and the
power plug is disconnected
from the outlet.
2) Open the front cover of the finisher.
<Staple Finisher-D1>
F-6-55 F-6-55
6
Installation > Installation Procedure > Connecting to the Upstream Connection Machine
1) Fit the positioning pin installed on the upstream connection machine in the positioning hole on the finisher to connect
the finisher to the upstream connection machine fittingly.
<Booklet Finisher-D1>
6 Installation > Installation Procedure > Connecting to the Upstream Connection Machine
F-6-56 F-6-56
F-6-54 F-6-54
6-23
6-23