Saddle Unit - Canon FINISHER-C1 Service Manual

CHAPTER 4 MECHANICAL CONSTRUCTION
2. Removing and Installing the

Saddle Unit

1) Remove the grate-shaped shutter. (See I-5
"Tray Assembly.")
2) Remove the four screws [1], and remove
the PCB cover [2].
3) Remove the screw, and remove the folding
roller knob [3].
4-22
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[ 2 ]
[ 1 ]
[ 1 ]
Figure 4-113B
[ 3 ]
Figure 4-114B
[ 1 ]
[ 1 ]