Removing The Saddle Unit - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Main Units > Removing the Saddle Unit

Removing the Saddle Unit

1) Pull out the saddle unit to the service
position.
(Refer to page 4-32)
2) Disconnect the connector and release the harness from the wire saddle on the rear of the saddle unit.
x6
x1
4 Parts Replacement and Cleaning Procedure > Main Units > Removing the Saddle Unit
x3
F-4-70 F-4-70
4-34
F-4-71 F-4-71
4-34