Removing The Shutter Torque Limiter; Removing The Stapler Unit - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Stapler Unit

Removing the Shutter Torque Limiter

1) Open the front door.
<Finisher (Staple Finisher)>
F-4-83 F-4-83

Removing the Stapler Unit

1) Open the front door.
<Finisher (Staple Finisher)>
F-4-86 F-4-86
4 Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Stapler Unit
<Saddle Finisher (Booklet Finisher)>
<Saddle Finisher (Booklet Finisher)>
2) Remove the left inner 3) Pull out the pin and remove the shutter torque limiter.
cover.
(Refer to page 4-20)
F-4-84 F-4-84
3) Remove the clip, the flange and the straight pin.
2) Remove the left inner
cover.
(Refer to page 4-20)
F-4-87 F-4-87
4-40
F-4-85 F-4-85
F-4-88 F-4-88
4-40