Canon Staple Finisher-D1 Service Manual page 136

4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Folding Rollers (Upper)/(Lower)
7) Release the harness from the wire saddles and edge saddles in the rear
side. Remove the 6 screws and remove the unit fixing base (rear).
x1
x6
x6
9) Slide the folding roller (upper) and then remove it.
4 Parts Replacement and Cleaning Procedure > Other Parts > Removing the Folding Rollers (Upper)/(Lower)
8) Remove the C ring, spacer and bearing.
F-4-186
F-4-188
F-4-187
4-76
4-76