4
Parts Replacement and Cleaning Procedure > Motors > Removing the Swing Guide Motor (M110)
Removing the Swing Guide Motor (M110)
3) Remove the 2 screws and remove the motor cover.
1) Remove the grated-
shaped upper guide.
(Refer to page 4-23)
2) Remove the upper cover.
(Refer to page 4-18)
5) Remove the tension spring and the 4 screws, and then remove
the swing guide motor.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Swing Guide Motor (M110)
4) Disconnect the motor connector.
F-4-170
F-4-172
F-4-171
4-70
4-70