Removing The Thrust Plate - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Thrust Plate

Removing the Thrust Plate

1) Remove the thrust unit. 2) Put marks on the retaining position of the thrust plate.
(Refer to page 4-37)
3) Remove the thrust plate.
x3
4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Thrust Plate
F-4-181
Caution:
When the thrust plate is installed,
align it to the lines marked in the
step 2) and fix it.
F-4-182
4-74
4-74