Canon Staple Finisher-D1 Service Manual page 96

4
Parts Replacement and Cleaning Procedure > Main Units > Removing the Saddle Unit
5) Remove the 2 screws from the rail (left) and rail (right).
x1
4 Parts Replacement and Cleaning Procedure > Main Units > Removing the Saddle Unit
F-4-74 F-4-74
6) Hold the saddle unit as shown in the figure, lift it
as the direction of the arrow, make sure that it has
parted from the rail, and carry it.
x1
F-4-75 F-4-75
4-36
F-4-76 F-4-76
4-36