CHAPTER 3 MECHANICAL SYSTEMS
2 Saddle Stitcher Assembly
2.1 Saddle Unit
2.1.1 Removing the Saddle Unit
1) Remove the eight screws [1], and detach
the rear cover [2].
2) Slide out the saddle unit; then, remove
the screw [3] and disconnect the three
connectors [4] to detach the harness
guide [5].
3) Remove the screw [6], and detach the
folding roller knob [7].
3-46
COPYRIGHT© 2001 CANON INC.
[1]
2000 2000 2000 2000
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[2]
[1]
[1]
[1]
F03-201-01
[5]
[4]
[4]
[3]
F03-201-02
[7]
[6]
F03-201-03