4
Parts Replacement and Cleaning Procedure > PCBs > Removing the Power Supply Unit
Removing the AC Noise Filter PCB
2) Disconnect the 4 connectors and remove the 2 screws, and then
1) Remove the rear cover
(lower).
remove the AC noise filter PCB.
(Refer to page 4-19)
Removing the Power Supply Unit
2) Disconnect the 3 connectors and remove the 4 screws, and then
1) Remove the rear cover
(lower).
remove the power supply unit.
(Refer to page 4-19)
4
Parts Replacement and Cleaning Procedure > PCBs > Removing the Power Supply Unit
F-4-205
F-4-206
4-83
4-83