12) Attach the stapler unit staple case by pushing until it clicks.
14) For Staple Finisher-D1, close the front cover and proceed to Section "Installation Procedure".
For BookletFinisher-D1, follow the procedure below.
<Staple Finisher-D1>
F-6-27
F-6-27
6
Installation > Unpacking and Checking the Contents > Unpacking Procedure
13) Take off the release paper from the spacer, and put the spacer on the upper cover of the finisher's right
side (paper feeding inlet side), along the inside edge [A] of the upper cover.
F-6-25
F-6-25
6
Installation > Unpacking and Checking the Contents > Unpacking Procedure
[A]
6-13
F-6-26
F-6-26
6-13