Ld 36 Analog Trunk Card Status - Nortel 1000E Maintenance Manual

160 Element Manager
•
With this generic approach, you can access the software server (primary
SSC) through its ELAN or TLAN interface, depending on the IP address
specified. The path to a workfile is not fixed.
The trigger function returns as soon as an element is notified. Pacing
of the downloads (to minimize network and server resource impact) is
accomplished by notifying the elements serially: the next element is not
notified until the current element has completed its workfile download.
The element retrieves and processes the workfile when triggered.
Processing can include the following:
•
•
•
•
The technician must refresh the software management web pages to view
the element status, including the software version. You must reboot selected
elements to use the new software when the upgrade process is complete.

LD 36 analog trunk card status

The STAT command in LD 36 provides status for all analog trunk cards
within the system. The card number prints before the list of units.
Sample output of LD 36 with the STAT command:
CARD 1
UNIT 00 = DSBL (TRK)(TIE LDR IMM/IMM)
UNIT 01 = UNEQ
UNIT 02 = DSBL (TRK)(TIE LDR IMM/IMM)
UNIT 03 = UNEQ
UNIT 04 = UNEQ
UNIT 05 = DSBL (TRK)(DID LDR IMM/IMM)
UNIT 06 = UNEQ
UNIT 07 = DSBL (TRK)(TIE LDR IMM/IMM)
Copyright © 2007, Nortel Networks
.
workfile path and file name
unpacking the workfile
making a backup copy of the original software
programming flash memory
copying disk files
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 01.02 Standard
Release 5.0 20 June 2007