Table of Contents
Advertisement
Bit
Bit Symbol
Type
1-0
SWRST[1:0]
R/W
Note 1: While data transmission is in progress, any software reset operation must be executed twice in succession.
Note 2: A software reset requires 2 clocks-duration at the time between the end of recognition and the start of execution of soft-
ware reset instruction.
Software reset
Overwriting "01" in place of "10" generates a software reset.
When a software reset is executed, the following bits are initialized and the transmit/receive circuit and
FIFO become initial state (Note1)(Note2).
Register
SCxMOD0
SCxMOD1
SCxMOD2
<TBEMP>, <RBFLL>, <TXRUN>
SCxCR
<OERR>, <PERR>, <FERR>
Page 221
Function
Bit
<RXE>
<TXE>
TMPM3V6/M3V4
2019-02-06
Advertisement
Table of Contents
