Response Time Of The Digital Power Outputs For A Load Between Ox+ And Ox− In The Event Of Failure; Figure 15: Load Between Ox+ And Ox; Table 27: Response Time Of The Digital Power Outputs For A Load Between Ox+ And Ox− In The Event Of Failure - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-667/000-003 4FDI/4FDO 24V/2A PROFIsafe V2 iPar
4.6.10.4 Response Time of the Digital Power Outputs for a Load between Ox+
and Ox− in the Event of Failure
For the safety response time, take into account the execution times of the
local bus, fieldbus and cycle time of the safe PLC!
To prevent personal and property damage, take into account the execution times
of the local bus, fieldbus and cycle time of the safe PLC in calculating the safety
response time.

Figure 15: Load Between Ox+ and Ox−

The safe response times for the protective wiring depicted above in the figure are
represented in the following table:
Table 27: Response Time of the Digital Power Outputs for a Load between Ox+ and Ox− in the Event
of Failure
Test pulse length
0 ms
1 ms
2 ms
5 ms
10 ms
20 ms
50 ms
100 ms
200 ms
500 ms
Safe response time
Version 1.4.2, valid from HW/SW Version 01/02
Device Description
18 ms
18 ms
18 ms
18 ms
18 ms
18 ms
18 ms
18 ms
18 ms
18 ms
Manual
47