Device Description - WAGO 750-632 Manual

18

Device Description

4 Device Description
The I/O module serves to control proportional valves. The I/O module has two
outputs with switchable dithering that can be current-controlled via pulse width
modulation. A unidirectionally functioning coil or a bidirectionally functioning coil
for a valve can be connected at each output. The I/O module can be set to the
valve characteristics using parameters. Thus, for example, operating ranges or
valve characteristic curves can be individually set.
In addition, the I/O module offers an adjustable setpoint ramp function. It is
therefore possible to parameterize the characteristics of the rising or falling
ramps. It is a given that the I/O module has two digital inputs that can, for
example, monitor threshold value switches.
The I/O module can be configured and parameterized via:
• WAGO-I/O-CHECK or
• Function blocks
Manual
Version 1.3.1, valid from FW/HW-Version 01/01
WAGO I/O System 750/753
750-632 Proportional Valve Module