24
Device Description
Use supply modules for ground (earth)!
The I/O module has no power jumper contacts for receiving and transmitting the
earth potential. Use a supply module when an earth potential is needed for the
subsequent I/O modules.
Observe the information on the power supply concept!
Detailed information and examples for supplying PROFIsafe I/O modules is
available in the section "Connect Devices" > ... > "Power Supply Concept".
Manual
Version 1.4.2, valid from HW/SW Version 01/02
750-667/000-003 4FDI/4FDO 24V/2A PROFIsafe V2 iPar
WAGO-I/O-SYSTEM 750