Digital Power Outputs; Table 15: Technical Data - Clock Pulse Duration At Input Filter Time; Table 16: Technical Data - Digital Power Outputs - WAGO -I/O-SYSTEM 750 Manual

36 Device Description
Table 15: Technical Data ‒ Clock Pulse Duration at Input Filter Time
Input filter time 0 ms
Input filter time 0.5 ms
Input filter time 1 ms
Input filter time 2 ms
Input filter time 3 ms
Input filter time 5 ms
Input filter time 10 ms
Input filter time 20 ms
Input filter time 50 ms
Input filter time 100 ms
Input filter time 200 ms
4.6.6

Digital Power Outputs

Table 16: Technical Data ‒ Digital Power Outputs
Power outputs
Achievable safety classes
Output nominal
current
Output current,
permissible range
Total output current
Output current for UL and ATEX
Output residual
current at signal "0"
Load resistance range
Output protection
Response threshold
output protection
Limitation of the inductive transient
voltage
Manual
Version 1.4.2, valid from HW/SW Version 01/02
750-667/000-003 4FDI/4FDO 24V/2A PROFIsafe V2 iPar
O1 ... O4
O1 ... O4
O1 ... O4
max.
O1+ ... O4+
O1- ... O4-
O1 ... O4
Min.
Typ.
Max.
WAGO-I/O-SYSTEM 750
Clock pulse duration 5 ms
Clock pulse duration 5 ms
Clock pulse duration 5 ms
Clock pulse duration 5 ms
Clock pulse duration 5 ms
Clock pulse duration 7 ms
Clock pulse duration 12 ms
Clock pulse duration 22 ms
Clock pulse duration 50 ms
Clock pulse duration 102 ms
Clock pulse duration 202 ms
4 outputs for actuators
8 × Cat. 2/PL d acc.
EN ISO 13849-1
4 × Cat. 4/PL e acc.
EN ISO 13849-1
8 × SIL2 acc. EN 62061
4 × SIL3 acc. EN 62061
8 × SIL2 acc. IEC 61508
4 × SIL3 acc. IEC 61508
2 A
20 mA ... 2.4 A
8 A at 55 °C ambient temperature
24 VDC, 2 A per channel, 4 A total
Max. 1.2 mA
Max. 600 μA
12 Ω ... 1.2 kΩ
Short-circuit-protected
2.4 A
3.5 A
5.5 A
See section "Connect Devices" > ... >
"Switching Inductive Loads"