Connection Type; Climatic Environmental Conditions; Table 21: Technical Data - Field Wiring; Table 22: Technical Data - Power Jumper Contacts - WAGO -I/O-SYSTEM 750 Manual

42 Device Description
4.6.8

Connection Type

Table 21: Technical Data – Field Wiring
Wire connection
Cross section
Stripped lengths
Table 22: Technical Data – Power Jumper Contacts
Power jumper contacts
Table 23: Technical Data – Data Contacts
Data contacts
4.6.9

Climatic Environmental Conditions

Table 24: Technical Data – Climatic Environmental Conditions
Surrounding air temperature, operation
Surrounding air temperature, storage
Relative humidity (without
condensation)
Operating altitude
Storage altitude
Pollution degree
Overvoltage category
Protection class
Protection type
Resistance to harmful substances
Maximum pollutant concentration at
relative humidity < 75 %
Special conditions
Manual
Version 1.4.2, valid from HW/SW Version 01/02
750-667/000-003 4FDI/4FDO 24V/2A PROFIsafe V2 iPar
CAGE CLAMP
0.08 mm² ... 2.5 mm², AWG 28 ... 14
8 mm ... 9 mm / 0.33 in
Blade/spring contact, self-cleaning
Slide contact, hard gold plated, self-
cleaning
0 ... 55 °C
−40 ... +85 °C
Max. 95 %
0 ... 2000 m
0 ... 3000 m
2
II
III
IP20
Acc. to IEC 60068-2-42 and
IEC 60068-2-43
SO
2
H S ≤ 10 ppm
2
Ensure that additional measures for
components are taken, which are used
in an environment involving:
– dust, caustic vapors or gases
– ionizing radiation
WAGO-I/O-SYSTEM 750
®
≤ 25 ppm