Change Password; Description Of The Call Options - WAGO 753-668/000-004 Manual

WAGO-I/O-SYSTEM 750
753-668/000-004 4FAI 0/4-20 mA Diff PROFIsafe
8.3.3.2

Change Password

Changing the password!
Use this function to reset the current password of an F I/O module.
To change the password, select the Password menu item.
If you have not assigned a password for the selected F I/O module, you can
specify a password in the Change F I/O module password dialog.
If you have already assigned a password, then you have to enter the current
password and the new password.
If you do not know the current password, you can use the master password to
assign a new one. The master password is 16 characters long and is
)[4~>#%qM}x=,:$~.
To close the WAGO Safety Editor, click the [Exit] button in the WAGO Safety
Editor toolbar.
8.3.4

Description of the Call Options

The WAGO Safety Editor can be started with various call versions. Depending on
the call option, the WAGO Safety Editor is started in either ONLINE or OFFLINE
mode.
In ONLINE mode, different communication media are available (serial
connection, TCP/IP connection, fieldbus connection)
Do not change the selected F I/O module or communication connection if
an application is open!
Changing the F I/O module to be parameterized or communication connection is
currently not possible at runtime of the WAGO Safety Editor. If you want to
parameterize a different F I/O module or you want to change the communication
connection, close and restart the WAGO Safety Editor.
Instances of the Safety Editor
In ONLINE mode, only one instance of the WAGO Safety Editor can be open. In
OFFLINE mode, as many instances of the WAGO Safety Editor as you want can
be open.
Version 1.0.0, valid from HW/SW Version 01/01
Commissioning 99
Manual