14
Important Notes
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
Avoid conductive pollution!
Suitable measures must be taken to prevent conductive pollution to achieve
Pollution Degree II in accordance with EN61131-2. If you are unable to exclude
that such materials will appear in the device environment, then install the devices
in an enclosure that is resistant to the conductive materials. Clean tools and
materials are imperative for handling devices.
Manual
Version 1.4.2, valid from HW/SW Version 01/02
750-667/000-003 4FDI/4FDO 24V/2A PROFIsafe V2 iPar
WAGO-I/O-SYSTEM 750