Technical Data; Device Data; Power Supply; Table 10: Technical Data - Device - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-667/000-003 4FDI/4FDO 24V/2A PROFIsafe V2 iPar
4.6

Technical Data

4.6.1

Device Data

Table 10: Technical Data — Device
Width
Height (from upper edge of DIN-35 rail)
Depth
Weight
4.6.2

Power Supply

Table 11: Technical Data ‒ Power Supply
Voltage supply
Overvoltage category
acc. EN 61131-2
Current consumption, system voltage
(5 VDC)
Current consumption, power jumper
contacts
typ.
(24 VDC)
Nominal voltage via power jumper
contacts (tolerance range)
Current via power jumper contacts
Reverse voltage protection for power
jumper contacts
Isolation (peak value)
24 mm
64 mm
100 mm
Approx. 100 g
Via system voltage local bus (5 VDC)
and power jumper contacts (24 VDC)
II
typ.
180 mA
20 mA + clock outputs + load current
24 VDC
(20.4 V ... 28.8 V)
10 A
Yes
500 V system voltage / field level
(power jumper contacts)
Version 1.4.2, valid from HW/SW Version 01/02
Device Description
Manual
33