Smartrax 3D Compensation Tab - Raven SmarTrax Calibration And Operation Manual

SMARTRAX 3D COMPENSATION TAB

Edit
• Forward and Downward - Indicate the orientation of the node programmed during calibration of the
SmarTrax system.
• Yaw Rate, Roll, Pitch, and Yaw - Real-time measurement data used by the 3D terrain compensation feature.
• Current Direction - Indicates the direction in which the machine is traveling. Verify that the direction of travel
is displayed correctly when the machine is being driven in both forward and reverse.
• 3D Compensation - Touch the 3D Compensation status button to toggle the 3D compensation features on or
off. When disabled, the SmarTrax system will not adjust the displayed guidance path for any machine tilt during
field operations.
• Calibrate - Used to calibrate the 3D terrain compensation feature. Refer to the Enhanced Tilt Calibration
section on page 54 for the calibration procedure.
P/N 016-0171-277 Rev. L
VIPER 4/4+ CALIBRATION AND OPERATION
SmarTrax 3D Compensation
65