CHAPTER
3
Mount the SmarTrax Hydraulic Valve
Open the door on the left side of the machine and remove the air cleaner and filter.
1.
SmarTrax Valve Mounting Location
FIGURE 1.
Mount the valve mounting bracket (P/N 116-0171-527) to the step bracket on the left side of the machine
2.
using the supplied bolts (P/N 311-0054-105), lock washers (P/N 313-1000-022), nuts (P/N 312-1001-037)
and flat washers (P/N 313-2300-013).
Manual No. 016-0190-060
M ounting the
C h a p t e r 3
SmarTrax Hydraulic
Valve
NOTICE
The appearance of the SmarTrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
9