Important Safety Information - Raven SmarTrax Calibration And Operation Manual

CHAPTER
1
Read this manual and the operation and safety instructions included with your implement and/or controller
carefully before installing the SmarTrax™ system.
• Follow all safety information presented within this manual.
• If you require assistance with any portion of the installation or service of your Raven equipment, contact your
local Raven dealer for support.
• Follow all safety labels affixed to the SmarTrax system components. Be sure to keep safety labels in good
condition and replace any missing or damaged labels. To obtain replacements for missing or damaged safety
labels, contact your local Raven dealer.
When operating the machine after installing SmarTrax, observe the following safety measures:
• Be alert and aware of surroundings.
• Do not operate SmarTrax or any agricultural equipment while under the influence of alcohol or an illegal
substance.
• Remain in the operator's position in the machine at all times when SmarTrax is engaged.
• Disable SmarTrax when exiting the operator's seat and machine.
• Do not drive the machine with SmarTrax enabled on any public road.
• Determine and remain a safe working distance from other individuals. The operator is responsible for disabling
SmarTrax when the safe working distance has diminished.
• Ensure SmarTrax is disabled prior to starting any maintenance work on the system or the machine.
• Carefully read and follow all safety requirements and precautions contained in this manual and the machine-
specific Installation Manual. Failure to follow safety instructions may lead to equipment damage, personal
injury, or death.
• When starting the machine for the first time after installing SmarTrax, be sure that all persons stand clear in
case a hose has not been properly tightened.
• The machine must remain stationary and switched off during SmarTrax installation or maintenance.
P/N 016-0171-277 Rev. L
I MPORTANT SAFETY
C H A P T E R 1
INFORMATION
NOTICE
WARNING
1