Raven SmarTrax Calibration And Operation Manual page 45

FIGURE 1. GPS Setup Screen
Edit
1. Press Edit.
2. Press GPS Setup.
3. Select GPS Settings.
4. Select the GPS Output tab.
5. Select GPS Out from the Ports drop-down box.
6. Select the Set for SmarTrax box so that the blue check mark is present.
7. Verify that the GPS settings match the settings shown in the right picture in Figure 1 above.
FIGURE 2. Serial Device Setup Screen
P/N 016-0171-277 Rev. L
GPS Setup
Edit
VIPER 4/4+ CALIBRATION AND OPERATION
GPS Settings
Serial Devices
GPS Output
39