Table of Contents
Advertisement
CHAPTER
3
Install the SmarTrax Node
Mount the SmarTrax Node
SmarTrax Node Installed
FIGURE 1.
Mount the SmarTrax node (P/N 063-0173-228) on the node mounting bracket (P/N 107-0172-055) using
1.
three 3/8"-16 nylon insert lock nuts (P/N 312-4001-109).
Insert the two large, rectangular connectors of the node harness (P/N 115-4001-087) into the correct ports
2.
of the node.
Tighten the bolts on the harness connectors to secure the connections.
3.
Lift the floor mat along the left side of the operator's seat.
4.
Place six double-sided tape strips (P/N 332-0000-019) on the bottom of the node mounting bracket.
5.
Remove the backing from the double-sided tape and adhere the node to the cab floor near the back-left
6.
corner of the operator's seat.
Note:
Position the node so that the connectors point forward.
Manual No. 016-5034-013 Rev. B
C ab Component
C h a p t e r 3
Installation
7
Advertisement
Table of Contents
