Raven SmarTrax system Supplement Installation Manual
For ford nh 9280 w/o high flow
Hide thumbs
Also See for SmarTrax system:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Raven SmarTrax system
Summary of Contents for Raven SmarTrax system
- Page 1 Ford NH 9280 W/O High Flow...
- Page 2 GPS signal from the US Department of Defense/NAVSTAR GPS satellites, the OmniSTAR correction service or the WAAS correction service. Raven Industries accepts no responsibility for the use of the signal for other than the stated purpose. Raven Industries shall not be responsible or liable for incidental or...
- Page 3 H A P T E R N T RO D U C T I O N Congratulations on your purchase of the Raven SmarTrax system! This system is designed to provide cutting-edge, hands-free steering of your machine via GPS coordinates.
- Page 4 Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual Basic Kit Below you will see the kit contents that you should have received with this Contents SmarTrax kit. Miller MD SmarTrax Kit Contents Quantity Item Description Part Number Kit, S.P.S.
- Page 5 Manual # 016-0190-046 Quantity Item Description Part Number Washer, Lock, Split, 3/8” 313-1000-022 Washer, Flat, 3/8” 313-2300-013 Manual, Installation 016-0190-046 Manual, Installation, Smartrax 016-9001-008 Label, Warning, Do Not Step 041-0159-688 Label, Warning, Tampering 041-0159-689 Cable, Hydraulic Solenoid/Override 115-0171-466...
- Page 6 Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual Notes:...
- Page 7 Caution must be exercised. Any work carried out on the hydraulic system must be performed in accordance with the machine manufacturer’s approved maintenance instructions. Raven Industries recommends that appropriate protective equipment be worn when working on the hydraulic system.
- Page 8 Customer Raven Support Center by any of the following methods: Industries • Via phone: 1-800-243-5435 • Via mail: Raven Industries Flow Control Division 205 E. 6th St. Sioux Falls, SD 57104 • Via email: fcdinfo@ravenind.com...
- Page 9 Manual # 016-0190-046 H A P T E R O U N T I N G T H E N I V E R S A L R A C K E T A N D A L V E Position the bracket on the steel hood support plate between the engine and the front of the cab.
- Page 10 Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual Note: Prior to attaching the steering assist valve to the mount- ing bracket, remove the existing T-port fitting and install the provided larger fitting.. Position the hydraulic valve on the universal bracket over the top of the proper hole pattern.
- Page 11 Manual # 016-0190-046 H A P T E R Y D R A U L I C S Pressure Hose Remove the existing pump to orbital hose from the orbital and the tee on the pri- ority valve. Attach a provided #12 JIC to #16 JIC adapter fitting to the tee. Con- nect proper end of the provided Pressure hose to the fitting and the remaining end to the P-port on the Steering Assist valve.
- Page 12 Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual Tee on tank return manifold (below pressure priority valve) Tank Port Hose Remove the existing tank to orbital hose at the return oil manifold and attach a provided #16 JIC tee fitting to the manifold. Re-connect the hose to the tee fitting. Install a #16 to #12 adapter fitting to the tee.
- Page 13 Manual # 016-0190-046 Excess Flow Hose Attach a 90-degree elbow adapter fitting to the EF port on the steering assist valve and connect one end of the Excess Flow hose to the fitting. Connect the remain- ing open end of the Excess Flow hose to the steering orbital, on the open pressure port.
- Page 14 Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual Notes:...
- Page 15 Manual # 016-0190-046 H A P T E R & W T E E R I N G O S I T I O N E N S O R I R I N G A R N E S S N S T A L L A T I O N The figure above shows the approximate mounting position of the steering posi- tion sensor.
- Page 16 Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual Note: It may be necessary to fabricate a mounting bracket to properly position the sensor. The figures below show the ends of the sensor and their respective fabricated mounting brack- ets.
- Page 17 Manual # 016-0190-046 H A P T E R T A R T R O C E D U RE S After installing the SmarTrax on your machine, always follow these start-up procedures. • Make sure the Steering Position Sensor does not over-extend or over-compress when turning the wheels.
- Page 18 Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual Notes:...
- Page 19 RAVEN INDUSTRIES LIMITED WARRANTY WHAT IS COVERED? This warranty covers all defects in workmanship or materials in your Raven Flow Control Product under normal use, maintenance, and service. HOW LONG IS THE COVERAGE PERIOD? This warranty coverage runs for 12 months from the purchase date of your Raven Flow Control Product.
- Page 20 P.O. Box 5107 www.ravenprecision.com Sioux Falls, SD 57117-5107 fcdinfo@ravenind.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under the copyright laws.