Commissioning (software)
5.3 Performing an online configuration
1. Save and compile the project.
2. Establish an online connection.
3. Select the SIMOTION D410 device in the Project Navigator.
4. Use the "Download CPU / drive unit to target device" function to download the SIMOTION
You can now run the automatic configuration at SINAMICS Integrated. For details, refer to the
section titled Starting automatic configuration (Page 94).
Additional references
Further information about establishing an online connection to the PG/PC is contained in the
following documentation:
●
●
● In the FAQ for
5.3.3
Starting automatic configuration
Prerequisites
You activated the online connection to SINAMICS Integrated.
94
D410 device to the target device. The connection to SINAMICS Integrated is activated
automatically.
SIMOTION SCOUT Configuration Manual
SIMOTION SCOUT Online Help
SIMOTION Utilities & Applications
SIMOTION Utilities & Applications is provided as part of the SIMOTION SCOUT scope of
delivery.
SIMOTION D410
Commissioning Manual, 04/2014