Toshiba TLCS-900/H1 Series Manual page 5

Original cmos 32-bit microcontroller

Hide thumbs Also See for TLCS-900/H1 Series:

Table of Contents

(24) SPI controller: 1 channel

Supports SPI mode of SD card and MMC card

Built-in FIFO buffer of 32 bytes to each Input/Output

(25) Product/Sum calculation: 1 channel

Supports calculation 32 × 32 + 64 = 64 bits, 64 − 32 × 32 = 64 bits and 32 × 32 − 64 =64 bits

Supports Signed calculations

(26) Standby function

Three Halt modes: IDLE2 (programmable), IDLE1, STOP

Each pin status programmable for standby mode

(27) Clock controller

Two blocks of clock doubler (PLL) supplies 48 MHz for USB and 80 MHz for CPU from 10

Clock gear function: Selectable high-frequency clock fc to fc/16

Clock for Timer (fs = 32.768 kHz)

(28) Operating voltage:

2 power supplies (Internal power supply (1.4 to 1.6 V), External power supply (3.0 to 3.6 V)

(29) Package

176-pin LQFP: LQFP176-P-2020-0.40F